B2 Interiors

b) Tiles: made up of 9mm MDF boards (fabric/laminated finish) fixed to the framework by specially designed. Each workstation will have a writing board /pin up board.  

c) Top Trim: - partition will be covered by an elegant aluminum trim which shall be fixed by means of hidden connections 

Work Top: Worktop will be 25mm  and legs with back 18mm pre-laminated practical bord with PVC edge binding. and Worktop will be sufficiently supported by vertical supports with 8mm pinup and marker board.

Note: Price given is for each seat only

a) Frame work: made up of 75mm or 50mm MS sections with necessary slotting for wiring throughout the height and the width of the partition. Frame work consist of two race ways one at the floor level and another below the table top for fixing electrical and networking phase plates.   

b) Tiles: made up of 9mm MDF boards (fabric/laminated finish) fixed to the framework by specially designed. Each workstation will have a writing board /pin up board.  

c) Top Trim: - partition will be covered by an elegant aluminum trim which shall be fixed by means of hidden connections 

 d) Work Top: Worktop will be 25mm pre-laminated with PVC edge binding. Worktop will be sufficiently supported by vertical supports.

a) Frame work: made up of 50mm x50mm MS tube sections with necessary slotting for wiring throughout the height and the width of the partition. Frame work consist of two race ways below the table top for fixing electrical and networking phase plates powder coated finished.
b) Work Top: Worktop will be 25mm pre-laminated practical bord with PVC edge binding. Worktop will be sufficiently supported by vertical supports.
Pinup and marker 300mm
Note: Price given is for each seat only

a) Frame work: made up of 50mm x50mm MS tube sections with necessary slotting for wiring throughout the height and the width of the partition. Frame work consist of two race ways below the table top for fixing electrical and networking phase plates powder coated finished.

b) Work Top: Worktop will be 25mm pre-laminated practical bord with PVC edge binding. Worktop will be sufficiently supported by vertical supports.

Pinup and marker 300mm H

a) Frame work: made up of 50mm x50mm MS tube sections with necessary slotting for wiring throughout the height and the width of the partition. Frame work consist of two race ways below the table top for fixing electrical and networking phase plates powder coated finished.

b) Work Top: Worktop will be 25mm pre-laminated practical bord with PVC edge binding. Worktop will be sufficiently supported by vertical supports.

 6mm Fasted glass 200mm H middle partition

Pinup and marker 300mm H

L TYPE WORKSTATION
TILE BASED PARTITION SYSTEM:-
Providing cluster   modular work station made out of CR sheet MS powder coated partition of 50mm thickand 1200 mm ht. with top in pin able / fabric upholstery/ prelam / marker of approved shade and color,
raceway at two level for running data & power cables .
table tops made out of 25mm prelam particle board,
50mm MS frame with tile partition b/w each workstation 

Frame work: made up of 50mm x50mm MS tube sections with necessary slotting for wiring throughout the height and the width of the partition. Frame work consist of two race ways below the table top for fixing electrical and networking phase plates powder coated finished.

b) Work Top: Worktop will be 25mm pre-laminated practical bord with PVC edge binding. Worktop will be sufficiently supported by vertical supports.

 Frame work: made up of 50mm x50mm MS tube sections with necessary slotting for wiring throughout the height and the width of the partition. Frame work consist of two race ways below the table top for fixing electrical and networking phase plates powder coated finished.

b) Work Top: Worktop will be 25mm pre-laminated practical bord with PVC edge binding. Worktop will be sufficiently supported by vertical supports.

 We are leading manufacturer of customised Modular Wooden Office Workstation. It is available at a reasonable price.                        a) Frame work: made up of 50mm MS sections with necessary slotting for wiring throughout the height and the width of the partition. Frame work consist of two race ways one at the floor level and another below the table top for fixing electrical and networking phase plates.   

b) Tiles: made up of 9mm MDF boards (fabric/laminated finish) fixed to the framework by specially designed. Each workstation will have a writing board /pin up board.  

c) Top Trim: - partition will be covered by an elegant aluminum trim which shall be fixed by means of hidden connections